Related Products
 |
7/16 Inch 6X37 FC Wire Rope |
Add to Cart |
 |
1/2 Inch 6X37 FC Wire Rope |
Add to Cart |
 |
1/4 Inch x 4 Inch Eye & Eye Turnbuckle |
Add to Cart |
 |
1/2 Inch X 6 Inch Eye & Eye Turnbuckle |
Add to Cart |
 |
5/8 Inch X 12 Inch Eye & Eye Turnbuckle |
Add to Cart |
 |
5/16 Inch X 4-1/2 Inch Jaw & Jaw Turnbuckle |
Add to Cart |
 |
5/8 Inch X 12 Inch Jaw & Jaw Turnbuckle |
Add to Cart |
 |
3/4 Inch X 9 Inch Jaw & Jaw Turnbuckle |
Add to Cart |
 |
7/8 Inch X 12 Inch Jaw & Jaw Turnbuckle |
Add to Cart |
 |
3/4 Inch X 9 Inch Eye & Jaw Turnbuckle |
Add to Cart |
 |
3/8 Inch 7X19 Galvanized Aircraft Cable |
Add to Cart |
375DF 3/8 Inch Drop Forged Wire Rope Clip
375DF 3/8 inch drop forged wire rope clip. Wire rope cable clamps are used in a variety of rigging applications. Used for terminating loop ends on cable assemblies. Cable clamps are used to secure cable back to itself. Include a U-bolt, clamp plate and 2 nuts. Cable clamps must be installed properly to insure safety.
$ 0.85
Add to CartAdditional Information
- Drop forged carbon steel base with steel U-bolt and finished hex nuts.
- For use with 3/8 inch wire rope, minimum number of clips 2, amount of rope to turn back 6 1/2 inches and torque required 45 ft/lbs.
- Each base has size forge into it.
- Saddle base is hot dip galvanized. U-bolt and nuts are zinc plated.
- Use only drop forged wire rope clips for heavy duty applications.
- Attach wire rope clips correctly. U-bolt should always be on dead end of rope side. Saddle should always be on live end of rope.
- Use recommended number of clips, depending on safety requirements.
- Weight 0.44 lbs.
