3M DBI/SALA 3101373 Nano-Lok Twin Leg 9 Foot Tie-Back Self Retracting Web Lifeline with WrapBax hook and twin leg fixed harness connector.  With the included fixed D-ring harness connector, two Nano-Lok self retracting lifelines can be attached directly to the back of most harnesses.  The fixed harness connector is required for use with ExoFit and other fixed D-ring harnesses.  100% tie-off configuration provides continuous fall protection and added mobility when moving from one location to another.  These new self retracting lifelines can be used in place of lanyards, reducing fall clearances.  The connector design provides proper snug fit to workers back eliminating nuisance flopping.  The Nano-Lok is the smallest and lightest Tie-Back self retracting lifeline on the market. Nano-Lok webbing or directly to an anchor point.  The WrapBax hook features 5,000 lb strength-even on the gate.  The exclusive WrapBax hook design and additional 3 feet of webbing allows this retractable to be wrapped around an anchor point and directly to the lifeline webbing.  Eliminates the need for a separate anchorage connector such as a cross arm strap or cable choker.  The Nano-Lok retains tension on the lifeline at all times, keeping it out of the workers way and reducing dragging, snagging and trip falls.  The retractable locks quickly to stop falls within inches reducing free fall distance and providing greater protection at lower heights.  Swiveling anchorage loop prevents webbing from twisting.  Much safer to use than a shock absorbing lanyard as they are designed to arrest a fall within inches.  Compact, impact-resistant housing.  Nano-Lok is lighter than most lanyards, weighing 4.6 lbs.  Rated for a total combined weight of 420 lbs.

• Twin leg Nano-Lok for 100% tie-off.
• Lightest most compact unit on the market.
• Swivel loop prevents webbing from twisting.
• Included fixed harness connector allows direct attachment of both Nano-Loks to ExoFit and other fixed D-ring harnesses.
• Rated for combined weight of 420 lbs.
• The WrapBax hook is specifically designed for tie-back use-eliminates need for a separate anchorage connector.
• Limits arresting forces to 900 lbs or less.
• WrapBax hook capacity of 5,000 lb including the gate.
• 6 foot length with additional 3 feet of Tie-Back webbing.
• Automatic, quick activating arrestor locks up within inches reducing free fall distance.
• I-Safe equipped to track inspections and control inventory.
• Design provides snug fit to workers back eliminating nuisance flopping.
• Meets or exceeds industry standards including OSHA 1926.502 and 1910.66.
• Weight 4.6 lbs.