3M DBI/SALA 8102009 Salalift II confined space personnel or material winch with 90 feet of galvanized cable, mounting bracket and carrying bag.  Whether raising, lowering or supporting personnel or materials, our confined space rescue and retrieval systems are designed for versatility and ease of use.  They serve as true workhorses, providing routine work support and fall protection and performing as perfectly engineered rescue/retrieval systems during emergencies in areas such as manholes, tanks, bins, vaults, etc.  For utmost confidence, 3M DBI/SALA's packaged rescue systems are a perfect rescue/retrieval safety solution.  You can go into the job knowing that your equipment is ready to go; totally compatible and built with 3M DBI/SALA quality.

• Easy operation; the Salalift II is manually operated, simply rotate the handle to raise or lower personnel or materials. Gear ratio is 6:1 with an average lifting speed of 12.75 ft/min. (no power is required).
• 90 feet of 1/4 inch galvanized steel cable complete with carrying bag.
• Lightweight design for ease of use.
• Quick-mount system, incorporates a quick-mount bracket which mates with a bracket on all DBI/SALA support structures allowing the user to attach/detach device with a detent pin and makes retrofitting easy.
• Free-wheel mode; an operator activated free wheel mode allows the drum to rotate and cable to pay-out freely as the attached worker descends or moves about (handle remains stationary).
• Built-in protection; the free-wheel mode has a built-in overspeed brake with energy absorbing capacity (similar to self retracting lifelines0 which provides secondary fall protection and added security.
• Overload clutch; a built-in overload clutch automatically slips to prevent severe overloading or damage, it also helps prevent injury to entangled personnel during raising operation.
• Housing cover; constructed from a durable medium density polyethylene with a built-in ergonomic carrying handle. This housing material reduces weight and will not dent or corrode like metal housings.
• Corrosion resistant; complete with anodized aluminum side plates, zinc plated gears and shafts, stainless steel springs and aluminum drum for superior corrosion resistance.
• Level wind; the drum level wind mechanism aids in spooling the cable onto the drum evenly and prevents slack line.
• Safety hook; the swiveling self locking snap hook provides secure connection to the load and prevents the cable from twisting for smoother operation. Complete with impact indicator enabling user to visually check to see if device has been impact loaded.
• Reserve lifeline system; allows brake to activate and absorb energy if fall occurs at the end of the lifeline travel.
• Meets or exceeds all industry regulations including OSHA and ANSI.
• Weight 35 lbs.