BlueWater 500011 7.5 Foot Powder Coat Safety Rail 2000 Kit consisting of 1 counterweight base, 1 rail section and 2 locking pins.  The Safety Rail 2000 is a portable counterweight non-penetrating guardrail system that does not require use of any tools.  This kit is made up of one 300014 counterweight base, one 500004 7.5 foot Safety Rail 2000 section and two 100016 locking pins.  The counterweight base has four slotted entry ports to provide a wide range of rail placement.  Rubber pads on underside of base protects roof surface and provides stability on slippery surfaces.  The 108 lb base has a lifting point to accommodate use of EZ Mover dolly.  The locking detent pin secures the 7.5 foot rail to the base providing visual means of verifying that it is locked into place.  The 1-5/8 inch steel tubing top rail measures 42 inches above work surface.  Bright, safety yellow powder coat finish.  Each rail section includes tube with set-up instructions.  Guardrail systems require outrigger rail section at each end of the run.  Safety Rail 2000 system has been tested to meet OSHA 29 CFR 1910.23 and 1926.502 requirements for guardrail systems.

• SafetyRail 2000 does not require penetrating roof surface.
• Kit consists of counterweight base, 7.5 foot rail section and two locking pins.
• Made in USA.
• Bright, safety yellow powder coat finish.
• Rail section made from 1-5/8 inch steel tubing.
• Base dimensions 21-1/4" X 21-1/4".
• The 4 slotted base entry ports provide wide range of rail placement.
• Rubber pads on underside of base protects roof surface and provides stability on slippery surfaces.
• Locking detent pin secures rail section to base.
• Complies with OSHA regulations 29 CFR 1910.23 and 1926.502.
• Kit weighs 132 lbs.
• CALL FOR FREIGHT ESTIMATE 614/876-8698.