BlueWater 500260 3.5 Foot Powder Coat Stealth-Rail Kit consisting of 1 counterweight base, 1 Stealth-Rail section and 2 locking pins.  The Stealth-Rail is a collapsible, portable counterweight non-penetrating guardrail system that does not require use of any tools.  This kit is made up of one 300014 counterweight base, 500248 3.5 foot Stealth-Rail section and two 100016 locking pins.  The rail section is designed to lay down flat on the roof surface when not in use to preserve your buildings architectural integrity.  To use, simply raise rail section to the vertical position, insert detent pin, locking the rail into place.  The counterweight base has four slotted entry ports to provide an infinite range of rail placement.  Rubber pads on underside of base protects roof surface and provides stability on slippery surfaces.  The 108 lb base has a lifting point to accommodate use of EZ Mover dolly.  The locking detent pin secures the 3.5 foot Stealth-Rail to the base providing a visual means of verifying that it is locked into place.  The 1-5/8 inch steel tubing top rail measures 42 inches above work surface.  Bright, safety yellow powder coat finish.  Each rail section includes tube with set-up instructions.  Guardrail systems require outrigger rail section at each end of the run.  Stealth-Rail system has been tested to meet OSHA 29 CFR 1910.23 and 1926.502 requirements for guardrail systems.

• Stealth-Rail does not require penetrating roof surface.
• Kit consists of counterweight base, 3.5 foot Stealth-Rail section and two locking pins.
• Made in USA.
• Rail is collapsible when not in use, preserving buildings architectural integrity.
• To make functional, simply raise rail to upright position and lock in place with attached detent pin.
• Bright, yellow powder coat finish.
• Stealth-Rail section made from 1-5/8 inch steel tubing.
• Base dimensions 21-1/4" X 21-1/4".
• The 4 slotted base entry ports provide infinite range of rail placement.
• Rubber pads on underside of base protects ruoof surface and provides stability on slippery surfaces.
• Base includes lifting point for use with EZ Mover dolly.
• Locking detent pin secures Stealth-Rail section to base.
• Complies with OSHA 29 CFR 1910.23 and 1926.502.
• Kit weighs 122 lbs.
• CALL FOR FREIGHT ESTIMATE 614/876-8698.