Miller Fusion X10002 Roof Anchor Post for use on standing seam panels with seam spacing from 11.75 inches to 24 inches.  Miller Fusion is approved for use as a temporary or permanent roof anchor.  The four clamping mechanisms are tightened from above the base plate for ease of attachment and requires no penetration of the standing seam roof panel.  The clamping mechanisms can be positioned on the base to accommodate seam spacing from 11.75 inches to 24 inches.  Post with D-ring attachment extends 8.6 inches above base.  The Fusion roof anchor post is uniquely engineered to absorb energy minimizing fall arrest forces imposed on the user and the roof structure.  The energy absorbing load distribution component within the Fusion post activates at 1,000 ft/lbs.  In the event of a fall, the top of the Miller Fusion roof anchor post reorients with the force in a direct line and activates the patent-pending energy absorber.  Stainless steel internal components and powder coat finish over zinc plated post and base make the Fusion ideal for permanent installations.  Install only on flat standing seam surfaces.  Provides fall protection for roof inspection, HVAC, debris removal and solar panel installation.

• Single point anchor point.
• 310 lb capacity.
• Approved for permanent or temporary installations.
• Clamps onto standing seam. Does not penetrate roof panel.
• For use with standing seam spacing from 11.75" to 24".
• Clamping bolts tightened from above the plate for easy fastening and inspection.
• Fusion post extends 8.6 inches above base.
• In event of a fall, Fusion post bends in direction of force along with the energy absorber minimizes the forces directed to the user and the roof surface.
• Fusion's stainless steel internal components and powder coat finish over zinc plating for long life.
• Use only on flat standing seam roof surfaces.
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.
• Weight 25 lbs.