Miller Fusion X10010 Roof Anchor Post for use on flat metal decking without ribs or trapezoid profile.  Miller Fusion is approved for use as a temporary or permanent roof anchor.  Requires a minimum of 24 gauge deck thickness.  Attaches directly to the deck surface and does not require roof penetration to sub-surface rafters or trusses.  Roof anchor includes rivets with sealing washers and mastic tape to prevent water damage to the roof.  Post with D-ring attachment extends 8.6 inches above base.  The Fusion roof anchor post is uniquely engineered to absorb energy minimizing fall arrest forces imposed on the user and the roof structure.  The energy absorbing load distribution component within the Fusion post activates at 1,000 ft/lbs.  In the event of a fall, the top of the Miller Fusion roof anchor post reorients with the force in a direct line and activates the patent-pending energy absorber.  Stainless steel internal components and powder coat over zinc plated post and base make the Fusion ideal for permanent installations.  Miller Fusion is designed for use on flat or low slope (less than 4:12 pitch) roof structures.  Provides fall protection for roof inspection, HVAC, debris removal and solar panel installation.

• Single point anchor point.
• 310 lb capacity.
• Approved for temporary or permanent installations.
• Fusion post extends 8.6 inches above base.
• Requires minimum of 24 gauge deck thickness.
• for use with metal deck surface without ribs or trapezoid profile.
• For use on flat or low slope (less than 4:12 pitch) roof surface.
• Attach directly to roof deck. Does not require penetration to trusses or rafters.
• In event of a fall, Fusion post bends in direction of force along with the energy absorber minimizes the forces directed to the user and the roof surface.
• Fusion's stainless steel internal components and powder coat finish over zinc plating for long life.
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.
• Weight 17 lbs.