Miller Fusion X10020 Multi-Purpose Roof Anchor Post for use on metal sheathing, wood and concrete roofing. Miller Fusion is approved for use as a temporary or permanent roof anchor. Designed for use with metal sheathing with minimum 24 gauge thickness, plywood with minimum thickness of 5/8 inch and concrete decking with minimum thickness of 6.5 inches. Fastening hardware not included. Attaches directly to the deck surface and does not require roof penetration to sub-surface rafters or trusses. Post with D-ring attachment extends 8.6 inches above base. The Fusion roof anchor post is uniquely engineered to absorb energy minimizing fall arrest forces imposed on the user and the roof structure. The energy absorbing load distribution component within the Fusion post activates at 1,000 ft/lbs. In the event of a fall, the top of the Miller Fusion roof anchor post reorients with the force in a direct line and activates the patent-pending energy absorber. Stainless steel internal components and powder coat over zinc plated post and base make the Fusion ideal for permanent installations. Miller Fusion is designed for flat or low slope (less than 4:12 pitch) roof structures. Provides fall protection for roof inspection, HVAC, debris removal and solar panel installation.

• Single point anchor point.
• 310 lb capacity.
• Approved for temporary or permanent installations.
• Extremely versatile, can be used with metal, wood or concrete roofing.
• Fusion post extends 8.6 inches above base.
• Fastening hardware not included.
• For use on flat or low slope (less than 4:12 pitch) roof surface.
• In event of a fall, Fusion post bends in direction of force along with the energy absorber minimizes the forces directed to the user and the roof surface.
• Fusion's stainless steel internal components and powder coat finish over zinc plating for long life.
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.
• Weight 20 lbs.