SAPS SAP21H Safety Anchor Post System For Use On Elevated Surfaces; Parapet Walls in All Concrete Construction. The post is surface mounted to the concrete. The SAPS Safety Anchor Post has a built-in stem coil rod that extends from its base. The protruding coil rod is threaded into the embedded insert. The SAPS post rotates clockwise by hand until it is secured. An attached tightening arm provides final tensioning to the concrete surface. The SAP21H is a temporary guardrail post that exceeds OSHA's 200 lb side load requirements. Designed for use on elevated surfaces that do not meet the 42 inch height requirement. The SAP21H has a unique rail clamping system that pinches the rails against the post rail bracket. Does not require cleating of rail sections. The vice clamp greatly reduces installation time of rails and does not damage wood rails allowing re-use on the next job. The rail brackets on the post rotate for ease of installation. The average time to install 32 feet of SAPS guardrail including rails is 2 to 2-1/2 minutes. Your fall protection needs can be met by ordering your precast with preset embeds.

• Greatly reduces installation time and labor costs.
• Minimum concrete strength of 2,500 PSI.
• Meadow Burke B-75 6 inch wall brace insert embed approved for precast use with SAP21H post.
• Use 3/4" Hilti HDI (-L) w/3-3/16" embed or 3/4" Simpson DIA B75 w/3-1/8" embed drop in anchors for projects where concrete has already been poured.
• Very rugged construction.
• Surface mounted to concrete for safe, secure and quick installation.
• Post includes tightening arm that aids in securing thread mount post to embed.
• Vice clamp rail bracket secures rail without having to cleat them and allows them to be re-used.
• Guardrail system exceeds OSHA 200 lb lateral load requirements.
• For use in elevated concrete surfaces such as parapet walls.
• SAP21H post requires no tools for installation.
• Maximum spacing of SAP post is 8 feet.
• Braced base plate for maximum support.
• The rail bracket rotates for ease of installation.
• Made in USA.
• Weight 11.6 lbs.
• Meet or exceeds OSHA standards.