SAPS SAP60SM Safety Anchor Post System For Use In Concrete Construction. The post is side mounted to concrete parapet walls or low barrier rail walls. The SAPS Safety Anchor Post has a built-in stem coil rod that extends from the base. The mounting base is threaded into the embedded insert. Final tensioning to the concrete is provided by use of a wrench. The SAPS SAP60SM is a temporary guardrail post that exceeds OSHA's 200 lb side load requirements. SAP60SM has a unique rail clamping system that pinches the rails against the post rail bracket. Does not require cleating of rail sections. The vice clamp greatly reduces installation time of rails and does not damage wood rails allowing re-use on the next job. The rail brackets on the post rotate for ease of installation. The average time to install 32 feet of SAPS guardrail including rails is 2 to 2-1/2 minutes.

• Greatly reduces installation time and labor costs.
• Requires minimum concrete thickness of 6 inches.
• Minimum concrete strength of 2500 PSI.
• Ideal for applications where surface mount is not practical.
• Very rugged construction.
• Vice clamp rail brackets secure rails without having to cleat them allowing them to be re-used.
• Guardrail system exceeds OSHA 200 lb lateral load requirements.
• Maximum spacing of SAPS post is 8 feet.
• Final tensioning of SAPS post requires use of wrench.
• The rail brackets rotate for ease of installation.
• Ideal for attaching to concrete parapet walls or low barrier rail walls.
• Made in USA.
• Weight 28.3 lbs.
• Meet or exceeds OSHA standards.